The BBQ & Grilling Thread

KenB925 · 10-30-2017, 10:26 AM

Well, we finally have some backyard progress. I have 7 more beams to put up, one in each corner. I got started, got one up, then realized I only had right hand brackets, not half right and half left, clearly I didn't check what Javier (real name btw, I've know him for years) at the lumber yard gave me.

I also had to have a couple of connections re-engineered, so I should be getting the calcs back today or tomorrow so I can go to the city, change the permit, then get an inspection...PITA

anyway, on to the pics. The fences will probably be replaced in the spring, one of them is in pretty bad shape, but why put it in to get messed up this winter.

Joekerr · 10-30-2017, 10:36 AM

^
Nice job so far!

KenB925 · 11-06-2017, 10:15 AM

I finished the framing, and got my engineering updated, I'll visit the city this week. The weather is becoming a bit of an issue, I tarped the framing because we had a little rain. Its supposed to rain again this weekend, but I'm going to try to get the T&G for the roof stained either in the garage or under the tarp.

KenB925 · 11-06-2017, 10:16 AM

.

lsturbointeg · 11-09-2017, 08:43 PM

been doing different marinades for skirt steaks and this one came out pretty good! Worchester sauce, balsamic vinegar, garlic, chili powder and olive oil marinated for about 3 hours. after it was grilled i than heated some Beringer Cabernet Sauvignon in a pan with fresh RoseMary for a few minutes than reduced to 70% and added a pinch of salt and a 1/4 butter and poured it over the meat. Holy moly was it delicious!

KenB925 · 12-04-2017, 01:12 PM

****UPDATE****

I've been making progress, my knees, neck, and lower back are not happy. The ceiling is all 2" x 8" T&G, first stained, then cut placed and nailed off. I guess its been about 5 days actually cutting and installing pieces one weekend days when I can (kid parties and such get in the way), but its going well and I'm pleased with how its turning out. My neighbors think I'm insane, many nights after work I'm in the garage staining or moving lumber or some nonsense.

When its 'done' (approved and signed off by the city), I'm going to box in those ugly little rafters and put some recessed lights in the 'false' beams.

I have also bought a BBQ and a side burner, I wanted to spend much less then I did, but when you handle the cheaper one, and really nice one there is no comparison. The burners on these things are bade from cast stainless that is almost 1/4" thick and guaranteed for life, I hate burners that rot out.

I'll keep my pellet cooker too, just not in the pavilion.

Ooh, almost forgot, I ordered a 50" tv, and I got a cool motorized mount that will pull the tv up behind the big horizontal beam and hide it under the eaves when it is not being used, should be pretty slick!

KenB925 · 12-04-2017, 01:14 PM

What is remaining of the beams sticking out from under the tarp will be cut off.

I was 3 16' boards short of finishing yesterday. There is a lot of drop with all these 45 degree cuts.

UncleWede · 12-04-2017, 01:21 PM

After TV is installed, PM me your address

For a friend. . .

KenB925 · 12-04-2017, 01:33 PM

Quote:

Originally Posted by UncleWede

After TV is installed, PM me your address

For a friend. . .

TVs are so cheap these days I'm not super worried about it, and I'm going to build a frame around the thing, when it retracts it will be pretty well boxed in. That along with all the cameras (and night vision scopes) it should be ok

ouchie · 12-04-2017, 01:48 PM

I'm cooking oxtail!

UncleWede · 12-04-2017, 05:26 PM

Quote:

Originally Posted by ouchie

I'm cooking oxtail!

caldo?

ouchie · 12-04-2017, 06:12 PM

Quote:

Originally Posted by UncleWede

caldo?

Eating it with rice or make a sandwich

UncleWede · 12-04-2017, 06:32 PM

I still remember the first time I went to carneceria with my wife and the dude brought out a fresh tail, then a few minutes later these little discs of meat.

"Honey, we can afford to buy real meat now"

infinitekidM2C · 12-04-2017, 07:59 PM

where's txstyle?

lsturbointeg · 01-30-2018, 04:49 PM

even thos it's snowing and freezing outside i was dying for some grill so i grilled up some skirt steaks marinaded in red wine, Worcester sauce, Balsamic Vinegar and garlic

P1 · 01-30-2018, 04:54 PM

I just wanted to let everyone know that I purchase a Weber Smokey Mountain, so hopefully I'll be able to start contributing to this thread shortly.

lsturbointeg · 01-30-2018, 04:55 PM

Quote:

Originally Posted by P1et

I just wanted to let everyone know that I purchase a Weber Smokey Mountain, so hopefully I'll be able to start contributing to this thread shortly.

AWESOME! can't wait to see what you got cooking

P1 · 01-30-2018, 04:55 PM

Quote:

Originally Posted by infinitekid2002

where's txstyle?

I'm getting a bit worried now:

Last Activity: 10-30-2017 11:48 AM

infinitekidM2C · 01-30-2018, 04:57 PM

Quote:

Originally Posted by P1et

I'm getting a bit worried now:

Last Activity: 10-30-2017 11:48 AM

I think he was a bit too high profile. Black man with a nice house in Texas...

P1 · 01-30-2018, 04:58 PM

Quote:

Originally Posted by infinitekid2002

I think he was a bit too high profile. Black man with a nice house in Texas...

I know you're joking, but does anyone know what happened to him? You don't just go cold turkey after posting as much as he did.

UncleWede · 01-30-2018, 05:50 PM

ban hammer?

positiveions · 01-30-2018, 10:59 PM

Quote:

Originally Posted by KenB925

****UPDATE****

I've been making progress, my knees, neck, and lower back are not happy. The ceiling is all 2" x 8" T&G, first stained, then cut placed and nailed off. I guess its been about 5 days actually cutting and installing pieces one weekend days when I can (kid parties and such get in the way), but its going well and I'm pleased with how its turning out. My neighbors think I'm insane, many nights after work I'm in the garage staining or moving lumber or some nonsense.

When its 'done' (approved and signed off by the city), I'm going to box in those ugly little rafters and put some recessed lights in the 'false' beams.

I have also bought a BBQ and a side burner, I wanted to spend much less then I did, but when you handle the cheaper one, and really nice one there is no comparison. The burners on these things are bade from cast stainless that is almost 1/4" thick and guaranteed for life, I hate burners that rot out.

I'll keep my pellet cooker too, just not in the pavilion.

Ooh, almost forgot, I ordered a 50" tv, and I got a cool motorized mount that will pull the tv up behind the big horizontal beam and hide it under the eaves when it is not being used, should be pretty slick!

Are you planning on putting up a ceiling fan? It would help somewhat in the summer. But knowing the Bay area, only a month or so gets really hot.
Did you stamp the cement around the pool?

10-30-2017, 10:26 AM	#639
KenB925 Second Lieutenant 1125 Rep 265 Posts Drives: ZL1, Raptor Join Date: Feb 2017 Location: Bay Area, CA iTrader: (0)	Well, we finally have some backyard progress. I have 7 more beams to put up, one in each corner. I got started, got one up, then realized I only had right hand brackets, not half right and half left, clearly I didn't check what Javier (real name btw, I've know him for years) at the lumber yard gave me. I also had to have a couple of connections re-engineered, so I should be getting the calcs back today or tomorrow so I can go to the city, change the permit, then get an inspection...PITA anyway, on to the pics. The fences will probably be replaced in the spring, one of them is in pretty bad shape, but why put it in to get messed up this winter. Attached Images
	Appreciate 0 Quote

10-30-2017, 10:36 AM	#640
Joekerr Banned 7922 Rep 1,923 Posts Drives: 2017 Audi S6 Join Date: Jan 2008 Location: Toronto, ON iTrader: (0)	^ Nice job so far!
	Appreciate 0 Quote

11-06-2017, 10:15 AM	#641
KenB925 Second Lieutenant 1125 Rep 265 Posts Drives: ZL1, Raptor Join Date: Feb 2017 Location: Bay Area, CA iTrader: (0)	I finished the framing, and got my engineering updated, I'll visit the city this week. The weather is becoming a bit of an issue, I tarped the framing because we had a little rain. Its supposed to rain again this weekend, but I'm going to try to get the T&G for the roof stained either in the garage or under the tarp.
	Appreciate 0 Quote

11-06-2017, 10:16 AM	#642
KenB925 Second Lieutenant 1125 Rep 265 Posts Drives: ZL1, Raptor Join Date: Feb 2017 Location: Bay Area, CA iTrader: (0)	. Attached Images
	Appreciate 0 Quote

11-09-2017, 08:43 PM	#643
lsturbointeg Lieutenant General 9202 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	been doing different marinades for skirt steaks and this one came out pretty good! Worchester sauce, balsamic vinegar, garlic, chili powder and olive oil marinated for about 3 hours. after it was grilled i than heated some Beringer Cabernet Sauvignon in a pan with fresh RoseMary for a few minutes than reduced to 70% and added a pinch of salt and a 1/4 butter and poured it over the meat. Holy moly was it delicious! __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 1 DSB335d1317.50 Quote

12-04-2017, 01:12 PM	#644
KenB925 Second Lieutenant 1125 Rep 265 Posts Drives: ZL1, Raptor Join Date: Feb 2017 Location: Bay Area, CA iTrader: (0)	**UPDATE** I've been making progress, my knees, neck, and lower back are not happy. The ceiling is all 2" x 8" T&G, first stained, then cut placed and nailed off. I guess its been about 5 days actually cutting and installing pieces one weekend days when I can (kid parties and such get in the way), but its going well and I'm pleased with how its turning out. My neighbors think I'm insane, many nights after work I'm in the garage staining or moving lumber or some nonsense. When its 'done' (approved and signed off by the city), I'm going to box in those ugly little rafters and put some recessed lights in the 'false' beams. I have also bought a BBQ and a side burner, I wanted to spend much less then I did, but when you handle the cheaper one, and really nice one there is no comparison. The burners on these things are bade from cast stainless that is almost 1/4" thick and guaranteed for life, I hate burners that rot out. I'll keep my pellet cooker too, just not in the pavilion. Ooh, almost forgot, I ordered a 50" tv, and I got a cool motorized mount that will pull the tv up behind the big horizontal beam and hide it under the eaves when it is not being used, should be pretty slick! Attached Images
	Appreciate 3 lakefront646.50 RickFLM411857.00 P111735.00 Quote

12-04-2017, 01:14 PM	#645
KenB925 Second Lieutenant 1125 Rep 265 Posts Drives: ZL1, Raptor Join Date: Feb 2017 Location: Bay Area, CA iTrader: (0)	What is remaining of the beams sticking out from under the tarp will be cut off. I was 3 16' boards short of finishing yesterday. There is a lot of drop with all these 45 degree cuts.
	Appreciate 0 Quote

12-04-2017, 01:21 PM	#646
UncleWede Long Time Admirer, First Time Owner 18455 Rep 9,428 Posts Drives: G01 X3 M40i Dark Graphite Join Date: Jun 2005 Location: Oxnard, CA iTrader: (0)	After TV is installed, PM me your address For a friend. . .
	Appreciate 0 Quote

12-04-2017, 01:48 PM	#648
ouchie Second Lieutenant 117 Rep 261 Posts Drives: BMW Join Date: Apr 2011 Location: Los Angeles iTrader: (0)	I'm cooking oxtail!
	Appreciate 1 nyalpine907551.50 Quote

12-04-2017, 06:32 PM	#651
UncleWede Long Time Admirer, First Time Owner 18455 Rep 9,428 Posts Drives: G01 X3 M40i Dark Graphite Join Date: Jun 2005 Location: Oxnard, CA iTrader: (0)	I still remember the first time I went to carneceria with my wife and the dude brought out a fresh tail, then a few minutes later these little discs of meat. "Honey, we can afford to buy real meat now"
	Appreciate 0 Quote

12-04-2017, 07:59 PM	#652
infinitekidM2C Major General 4298 Rep 5,737 Posts Drives: 2019 M2 Competition Join Date: Nov 2007 Location: Orange County, CA iTrader: (4) Garage List 2019 M2 COMPETITION [9.75] 2008 135i (my old car) [7.56]	where's txstyle?
	Appreciate 1 Captain Blood13878.00 Quote

01-30-2018, 04:49 PM	#653
lsturbointeg Lieutenant General 9202 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	even thos it's snowing and freezing outside i was dying for some grill so i grilled up some skirt steaks marinaded in red wine, Worcester sauce, Balsamic Vinegar and garlic __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 2 P111735.00 nyalpine907551.50 Quote

01-30-2018, 04:54 PM	#654
P1 Lieutenant General 11735 Rep 11,191 Posts Drives: 2004 3/4 ton Duramax Join Date: Aug 2007 Location: United States iTrader: (1)	I just wanted to let everyone know that I purchase a Weber Smokey Mountain, so hopefully I'll be able to start contributing to this thread shortly.
	Appreciate 1 upstatedoc7534.50 Quote

01-30-2018, 05:50 PM	#659
UncleWede Long Time Admirer, First Time Owner 18455 Rep 9,428 Posts Drives: G01 X3 M40i Dark Graphite Join Date: Jun 2005 Location: Oxnard, CA iTrader: (0)	ban hammer?
	Appreciate 0 Quote