[Run Silent]

Originally Posted by Conissah

Yep! I love them, never used Chesters or anything but they're awesome. Had the same PNW grips and pedals on my previous Cannondale too, just a different color. I'm probably about to pull the trigger on their short stem!

Nice - I am currently building an Enduro bike, and using a lot of PNW components (dropper, lever, and bars).

Was debating between the PNW pedals and RF Aeffect.

[Lady Jane]

Just arrived...!

The size of that frame... But actually lighter than my former TREK.

[Lady Jane]

First "official" ride this morning in the trails while the heat was still bearable. A bit of tweaking was necessary but very pleased overall with the performance.

I reinstalled my front and rear strobes and temporarily MacGyver-ed a retaining hack for my GPS and camera case.

[Lady Jane]

An old gutted farm house that was moved on a new foundation and waiting to be re-born. I'll visit this site and document the progress over the next year(s).

[Conissah]

Pushed for a new PR today at my favorite loop… It’s just shy of 6 miles, has some pretty aggressive climbs and descents. I think I pushed too hard though, as I had to take more breaks than usual which meant a measly 2nd on total time (38:15 is my PR, did a 39:47 today).

Set 2 new PR’s on the loop though, 10.7 mph average (up from 9.7) and 35.2 mph top speed (up from 27.6). Was absolutely flying, just need better cardio so I don’t have to stop.

[Tambohamilton]

35mph off road is no joke! Especially if that's on singletrack

[Lady Jane]

After work ride. Bit more than I could chew when going too fast on a logging trail and took a tumble when my front wheel skidded on a wet rock. Not much damage but my upper left rib cage needed to be strapped. Please don't me me laugh... It only hurts when I breath...

[M_Six]

Ouch. Hope that heals up fast. Sore ribs are no fun.

[Conissah]

Originally Posted by Tambohamilton

35mph off road is no joke! Especially if that's on singletrack

It is! I have a chest mount on the way for my GoPro. Have no use for the footage really, but just want to record some of them.

[Lady Jane]

Originally Posted by M_Six

Ouch. Hope that heals up fast. Sore ribs are no fun.

A couple of Advil and a patch help me a bit last night. Saddled-up this morning early for a quick 10k. Still some localize tenderness.

[Conissah]

Set another PR (despite being muddy and crashing into a tree). Main loop (4.04 miles) done in 25:05, up from 27:49. Took no breaks for water, wasn’t easy though.

I REALLY need a beater vehicle. Getting tired of putting a dirty bicycle in the back of my M3…

[Lady Jane]

Since today is the Acadian Birthday Celebration, practically everything is closed to allow families to celebrate.

I went for a good ride this morning but didn't do anything stupid as my ribs are still sore.

A few pics:

[Lady Jane]

Rode by a nearby village where celebrations were underway.

[Lady Jane]

A quick ten before work this morning. Mainly groomed trails and side roads.

[Lady Jane]

My last TREK had Schrader valves and my new one uses Presta. Is it better to use an adapter or purchase a cycle pump made for Presta? What are you guys using ?

[M_Six]

Originally Posted by Lady Jane

My last TREK had Schrader valves and my new one uses Presta. Is it better to use an adapter or purchase a cycle pump made for Presta? What are you guys using ?

My Bontrager floor pump does both. My MTB has Schrader and the other bikes are all Presta. I don't remember the pump being very expensive.

[Conissah]

Originally Posted by Lady Jane

My last TREK had Schrader valves and my new one uses Presta. Is it better to use an adapter or purchase a cycle pump made for Presta? What are you guys using ?

The mini pump I carry on my bike does both, just have to unscrew the tip and flip a little rubber piece around. My floor pump also does both, just has 2 separate holes. I bought both of those items with my first MTB, was in a "bundle" for like $60. I DID have to buy a presta PSI gauge, $15 on Amazon.

[Run Silent]

Originally Posted by Lady Jane

My last TREK had Schrader valves and my new one uses Presta. Is it better to use an adapter or purchase a cycle pump made for Presta? What are you guys using ?

Most all floor pumps will do both. For on bike use, I gave up a mini pump years ago and switched to CO2, way more compact and simpler to use. You can get one for presta valves on amazon for peanuts.

[Tambohamilton]

Originally Posted by Lady Jane

My last TREK had Schrader valves and my new one uses Presta. Is it better to use an adapter or purchase a cycle pump made for Presta? What are you guys using ?

Get a pump that handles presta. Adaptors add faff to the stress of trying to fix a flat on the trail. And one more thing to lose in the weeds.

As others have said, your existing pump may well be adaptable between presta and Schrader; unscrew the collar around where you insert the valve into the pump. Pull out the rubber part, and pull out the plastic part behind that. Flip the plastic part and put it back in, flip the rubber part and put it back in. Reinstall the collar. Pump up presta tyres.

[Lady Jane]

A noon quickie.

15k around the village and trail.

Okay then...



Re-doing the roof of a local Church built between 1919 and 1923.

[spazzyfry123]

Originally Posted by Lady Jane

My last TREK had Schrader valves and my new one uses Presta. Is it better to use an adapter or purchase a cycle pump made for Presta? What are you guys using ?

My JoeBlow works great.

https://www.rei.com/product/132166/t...ike-floor-pump

[freakystyly]

Trails are really sandy with the dry summer this year... I regret going with a tighter tread tire. I keep spinning on the hills and don't have a ton of confidence on the turns anymore. My bike is a steel hardtail so it's heavy as heck, don't want to lose all the momentum but it's hard to keep.

The 44 tooth front gear feels great with the low roll resistance tires on the multi use trails tho. I think I accidentally made a commuter bike.