pistol magazine loaders

radix · 07-22-2010, 05:05 AM

I have a quick question. I presently have a Sig Sauer P226 chambered for a .40S&W round, but I plan on adding additional weapons later, none smaller than 9mm. The Sig came with three double stack magazines. The magazines are easy enough to load until you get to the eighth or ninth cartridge or so, then it requires considerable thumb strength to load them, largely because they're new, and the springs don't have much give yet. I personally don't have a problem loading the magazine to capacity, but I plan on taking a couple lady friends to the firing range, and I'd rather not spend all my time loading magazines and winding up with sore thumbs until the springs in the magazines have some give. So, to that end, I'm looking at purchasing a magazine loader to speed up the process. So far this device seems to be the best I've come across:

http://maglula.tripod.com/uplula_uplula.htm

http://www.amazon.com/Butler-Creek-U...owViewpoints=1

Looking at the amazon.com reviews, out of the 62 people that have reviewed it, 59 gave it a five star rating, the remaining three rated the device four stars out of a possible five.

So my question to you is, is there a device better suited toward accomplishing my goal?

Thanks in advance for any insight you might offer.

giants84 · 07-22-2010, 05:09 AM

UPLULA Is very good.

sg///M3 · 07-22-2010, 08:56 AM

i use the uplula as well. Works as advertised. Very easy to use, and saves my thumbs, especially with my double stack magazines.

immiketoo · 07-22-2010, 12:07 PM

Radix,

My experience with these devices is that they don't work as well as advertised and that while they do work they are fiddly and slow. Whenever I take new shooters out, or people with reduced hand strength, I load for them. It's quicker and more personable. Or, I have them load until they can't, and let them shoot with reduced mag capacity. I've never had anyone complain about shooting 11 instead of 15 rounds, and I teach a lot of people as part of my job. All that being said, I have not used the device above and I'd be curious about what you think if you do get it.

scollins · 07-22-2010, 05:30 PM

The UPLULA works extremely well for pistol mags, I wouldn't be without one. Loading my Glock mags or my STI2011 mags is a real bitch (sharp feed lips, strong springs) and the UPLULA slaps them down like a bitch. On my 1911 mags, I don't need it, but on double stack mags, it works extremely well.

I also use the LULA loader for my AR mags. LULA loaders work very well, and I wouldn't hesitate to buy one and use it.

immiketoo, you might want to check it out, since it really does work as advertised.

immiketoo · 07-22-2010, 05:36 PM

Thanks Scott, I always just thought they were over-hyped or for guys like my dad with bad arthritis. Now that I think of it tho, I have struggled with Glock mags. I use PMAGS for my AR, and they're easy, but I will check it out.

radix · 07-25-2010, 03:53 AM

Quote:

Originally Posted by immiketoo

Thanks Scott, I always just thought they were over-hyped or for guys like my dad with bad arthritis. Now that I think of it tho, I have struggled with Glock mags. I use PMAGS for my AR, and they're easy, but I will check it out.

I had the same skepticism you did. However, after reading the online reviews of the device, I came two one of two conclusions:

1. The manufacturer is running one of the best astroturfing (http://en.wikipedia.org/wiki/Astroturfing) campaigns I've ever seen.

or

2. The device works really well, and nobody has anything bad to say about it.

That said, I just got mine in the mail, and the thing works beautifully. Great device, five stars.

ScaredOnce · 12-30-2010, 11:30 PM

If you are taking new shooters to the range, you shouldn't be topping o any mags. Just stick to a consistent low round number, like 5. Count shots (you surely do this by practiced habit anyways) and it adds an element of safety.

I've bought some sidearms over the years that have came with "LOADERS", but they are all junk.

CollinsE90 · 12-30-2010, 11:44 PM

OMG radix doesn't know something

immiketoo · 12-30-2010, 11:46 PM

Holy old thread. I'm sure he does by now... Although I agree with Scared about not giving full mags to new shooters.

radix · 12-31-2010, 01:10 AM

Quote:

Originally Posted by immiketoo

Holy old thread. I'm sure he does by now... Although I agree with Scared about not giving full mags to new shooters.

Yep. The device is fantastic. 10/10 really.

s2k_335i · 12-31-2010, 01:36 AM

I never try a loader before but I heard it's good. Why shoot with a 40 not a 9mm? I have Sig 220 .45

ScaredOnce · 12-31-2010, 01:41 AM

Hey, if the mag loaders work for you, go for it.

I'm a pretty huge fan of .40s&w. Have a 4" XD40 and a G23c in that cal.

Do you guys shoot often? (i'm new here)

silvergray545 · 12-31-2010, 02:02 AM

Holy shit. I'm ordering one for my pistols and one for my AR-15. Thanks for showing me this.

MMXIII 650i GC · 12-31-2010, 03:27 AM

Bit off topic, but I have a P226R .40S&W (awesome gun; good call Radix) - does anyone know if there is a legal / non LEO way to get a double stack (15 rd) mag shipped to CA?

BTW - this loader looks awesome. I think I need to pick one up for a couple different weapons...

immiketoo · 12-31-2010, 09:55 AM

Quote:

Originally Posted by MMIX M3

Bit off topic, but I have a P226R .40S&W (awesome gun; good call Radix) - does anyone know if there is a legal / non LEO way to get a double stack (15 rd) mag shipped to CA?

BTW - this loader looks awesome. I think I need to pick one up for a couple different weapons...

There is no way other than illegal/LEO options to obtain and possess that mag in your state. Except join the military. Sorry man, your state sucks for guns. IF you go private party, you run the risk of getting caught and you would risk your right to own any firearm. Not worth it IMO. Does anyone know differently?

immiketoo · 12-31-2010, 09:57 AM

Quote:

Originally Posted by radix

Yep. The device is fantastic. 10/10 really.

That's good to know. I will remember that for future stocking stuffer use. At work, we have always used the "suck it up sally" mentality

I shoot primarily 1911's so I don't have that problem, but others use a variety of double stack guns.

ScaredOnce · 12-31-2010, 02:26 PM

Quote:

Originally Posted by immiketoo

There is no way other than illegal/LEO options to obtain and possess that mag in your state. Except join the military. Sorry man, your state sucks for guns. IF you go private party, you run the risk of getting caught and you would risk your right to own any firearm. Not worth it IMO. Does anyone know differently?

Yes, there is one way - but, it'll be tough in Cali. Vote out the politicians that see fit to preempt Federal law!

immiketoo · 12-31-2010, 03:15 PM

I think he meant a REALISTIC way!

TunedM2C · 12-31-2010, 04:33 PM

I use the one that came with my XDM 40. It does the job.

immiketoo · 12-31-2010, 04:35 PM

Quote:

Originally Posted by Tuned1

I use the one that came with my XDM 40. It does the job.

That is a very cool gun. I want one. Their loader is a bit more simplistic but you are right, it does work...

ybbiz34 · 12-31-2010, 06:14 PM

The springs were pretty stiff initially in the mags that came with my new Sig P229 (.40 S&W).

I had to use some thumb strength to get the 12th round in there but after loading each up maybe 4-5 times I can now load 'em up no problem as fast as I load my Glock mags.

A tip: When you get a new mag, fill it up and keep it loaded for a while. I've found that helps to break in the mag springs.

07-22-2010, 05:05 AM	#1
radix you know he kills little girls like you 398 Rep 892 Posts Drives: - Join Date: Feb 2008 Location: - iTrader: (0)	pistol magazine loaders I have a quick question. I presently have a Sig Sauer P226 chambered for a .40S&W round, but I plan on adding additional weapons later, none smaller than 9mm. The Sig came with three double stack magazines. The magazines are easy enough to load until you get to the eighth or ninth cartridge or so, then it requires considerable thumb strength to load them, largely because they're new, and the springs don't have much give yet. I personally don't have a problem loading the magazine to capacity, but I plan on taking a couple lady friends to the firing range, and I'd rather not spend all my time loading magazines and winding up with sore thumbs until the springs in the magazines have some give. So, to that end, I'm looking at purchasing a magazine loader to speed up the process. So far this device seems to be the best I've come across: http://maglula.tripod.com/uplula_uplula.htm http://www.amazon.com/Butler-Creek-U...owViewpoints=1 Looking at the amazon.com reviews, out of the 62 people that have reviewed it, 59 gave it a five star rating, the remaining three rated the device four stars out of a possible five. So my question to you is, is there a device better suited toward accomplishing my goal? Thanks in advance for any insight you might offer. Last edited by radix; 07-25-2010 at 03:58 AM..
	Appreciate 0 Tweet Quote

07-22-2010, 05:09 AM	#2
giants84 Second Lieutenant 24 Rep 215 Posts Drives: 13 x6 5.0 Join Date: May 2010 Location: Brooklyn,New York iTrader: (0)	UPLULA Is very good.
	Appreciate 0 Quote

07-22-2010, 08:56 AM	#3
sg///M3 Lieutenant 6 Rep 436 Posts Drives: 2008 M3 DCT Join Date: May 2008 Location: Charlotte, NC iTrader: (0)	i use the uplula as well. Works as advertised. Very easy to use, and saves my thumbs, especially with my double stack magazines.
	Appreciate 0 Quote

07-22-2010, 05:30 PM	#5
scollins Bootleggin' 'n Gunrunnin' 144 Rep 2,372 Posts Drives: 2024 X3 M40i Join Date: May 2007 Location: Renton, WA iTrader: (3)	The UPLULA works extremely well for pistol mags, I wouldn't be without one. Loading my Glock mags or my STI2011 mags is a real bitch (sharp feed lips, strong springs) and the UPLULA slaps them down like a bitch. On my 1911 mags, I don't need it, but on double stack mags, it works extremely well. I also use the LULA loader for my AR mags. LULA loaders work very well, and I wouldn't hesitate to buy one and use it. immiketoo, you might want to check it out, since it really does work as advertised. __________________ Scott 2024 G01 X3 M40i, Brooklyn Grey Metallic /// 2015 F15 X5 35i, Space Gray Metallic, 99K miles /// 2013 F30 320xi, Mojave Metallic, 112k miles 2019 Ford F450 STX, Oxford White 2013 Ducati Multistrada Touring S, Red
	Appreciate 0 Quote

12-30-2010, 11:30 PM	#8
ScaredOnce Very Important 20 Rep 450 Posts Drives: 335xi (e92) Join Date: Sep 2010 Location: PIT iTrader: (0) Garage List 2008 BMW 335xi (e92) [9.00] 2008 Pontiac G8 GT [4.00] 2002 Pontiac Grand ... [0.00] 2001 Cadillac, Eldo ... [0.00]	If you are taking new shooters to the range, you shouldn't be topping o any mags. Just stick to a consistent low round number, like 5. Count shots (you surely do this by practiced habit anyways) and it adds an element of safety. I've bought some sidearms over the years that have came with "LOADERS", but they are all junk.
	Appreciate 0 Quote

12-30-2010, 11:44 PM	#9
CollinsE90 Where my bitches 784 Rep 1,924 Posts Drives: Cadillac coupe deville Join Date: Mar 2009 Location: street corner checking profits iTrader: (0)	OMG radix doesn't know something __________________
	Appreciate 0 Quote

12-31-2010, 01:36 AM	#12
s2k_335i This is it!! 18 Rep 672 Posts Drives: FBO 335i without meth Join Date: Jul 2010 Location: Land of Freedom iTrader: (1)	I never try a loader before but I heard it's good. Why shoot with a 40 not a 9mm? I have Sig 220 .45 __________________ DFW, TX. Current: 08' Cayenne GTS, 14' Boxster S, 12' CBR 1000', 04' Bayliner 2556 Sold: 2010 A4, 2008 335i, 2007 335i, 2006 M3, 2006 S2000, 1990 NSX, 1991 300zx, 1992 Supra, 1996 Prelude, 1981 CRX, 1980 Mustang.
	Appreciate 0 Quote

12-31-2010, 01:41 AM	#13
ScaredOnce Very Important 20 Rep 450 Posts Drives: 335xi (e92) Join Date: Sep 2010 Location: PIT iTrader: (0) Garage List 2008 BMW 335xi (e92) [9.00] 2008 Pontiac G8 GT [4.00] 2002 Pontiac Grand ... [0.00] 2001 Cadillac, Eldo ... [0.00]	Hey, if the mag loaders work for you, go for it. I'm a pretty huge fan of .40s&w. Have a 4" XD40 and a G23c in that cal. Do you guys shoot often? (i'm new here)
	Appreciate 0 Quote

12-31-2010, 02:02 AM	#14
silvergray545 Skittles, OT OG 2343 Rep 649 Posts Drives: Lots of M cars Join Date: Aug 2008 Location: Cleveland, OH iTrader: (1) Garage List 2016 BMW M3 ZCP [0.00] 2000 BMW M Roadster [0.00] 2004 BMW M3 [0.00] 2014 VW GLI [0.00]	Holy shit. I'm ordering one for my pistols and one for my AR-15. Thanks for showing me this.
	Appreciate 0 Quote

12-31-2010, 03:27 AM	#15
MMXIII 650i GC Private First Class 24 Rep 145 Posts Drives: 2013 F06 650i GC Join Date: Jun 2009 Location: Mission Viejo, CA iTrader: (4) Garage List 2009 E92 M3 [0.00]	Bit off topic, but I have a P226R .40S&W (awesome gun; good call Radix) - does anyone know if there is a legal / non LEO way to get a double stack (15 rd) mag shipped to CA? BTW - this loader looks awesome. I think I need to pick one up for a couple different weapons... __________________ Vorsteiner Titanium Cat Back Exhaust // Challenge Sport X-Pipe + HFCs // Monotec T03 Wheels // Powerchip ECU Custom Tune // Rogue Engineering Pulleys // H&R Sport Springs // Macht Schnell Filter // Challenge GT Carbon Lip Spoiler // Vorsteiner Type II Diffuser // AiB Angel Eyes // Matte Black Grille // Matte Black Side Fins // Matte Black M3 badge // All Roundels Blacked Out // Painted Reflectors
	Appreciate 0 Quote

12-31-2010, 04:33 PM	#20
TunedM2C Brigadier General 840 Rep 4,190 Posts Drives: 2016 LBB M2 Join Date: Jan 2008 Location: Earth iTrader: (2)	I use the one that came with my XDM 40. It does the job.
	Appreciate 0 Quote

12-31-2010, 06:14 PM	#22
ybbiz34 Brigadier General 698 Rep 4,959 Posts Drives: 2023 330i M Sport Join Date: Jul 2007 Location: USA iTrader: (1)	The springs were pretty stiff initially in the mags that came with my new Sig P229 (.40 S&W). I had to use some thumb strength to get the 12th round in there but after loading each up maybe 4-5 times I can now load 'em up no problem as fast as I load my Glock mags. A tip: When you get a new mag, fill it up and keep it loaded for a while. I've found that helps to break in the mag springs. __________________ Current: '23 G20 M Sport 330i Current: '20 X253 GLC300 SUV Gone: '20 W205 C43 Sedan Gone: '18 W205 C43 Sedan Gone: '13 W204 C63 Sedan
	Appreciate 0 Quote